Refurbished craft

method one

Key point 1: Use the VD easy-to-polish M1~M7 to polish the seven segments in sequence.

Point 2: Use the sealing glaze technology to polish 1~2 times.

Method Two

Key point 1: Use the traditional grinding plate 50#~2000# to grind the six segments in sequence.

Point 2: Use the crystal powder 1:5 to water, polish 1 time.

Point 3: Use the sealing glaze technology to polish 1~2 times.

Remarks: These two methods, after testing and testing, are reliable in process and excellent in quality, and can be selected according to their own needs. However, the workmanship method of the VD mirror polishing sheet has been tested, but the effect is obvious, and it is not recommended.

Maintenance advice

In the daily use of artificial stone, it is inevitable that people step on it and make it  matte . This test method can meet the needs of daily maintenance.

1, artificial stone cleaning

The artificial stone has a very low water absorption rate, and it is not easy to hide dirt and dirt. Generally, dirt and dust can be cleaned by a crystal surface machine + a cleaning pad + water. Serious pollution can be carried out with some stone cleaning agents.

2, artificial stone polishing

Tests have shown that the use of artificial stone can be maintained from 40 to 50 degrees to more than 80 degrees, which can meet the general requirements. However, it is still recommended to do surface sealing glaze treatment on this basis. It can greatly improve the gloss and decorative effect, and can improve the surface hardness and increase the abrasion resistance.

Several important questions

1. Does artificial stone need to be protected?

No need. The artificial stone is made of resin + stone powder, the material is even and dense, and there is no pore like natural stone. Moreover, the resin itself has the ability to resist water and refuse to stain. Therefore no protection is required. Brushing the protection can not penetrate.

2, artificial stone to make up special glue

Do not use marble glue when making artificial stone cutting glue. Mainly the problem of the expansion coefficient. The expansion coefficient of marble glue is close to that of natural stone. However, artificial stone has a larger expansion coefficient than natural stone, and the difference is obvious. Filling the gap of the artificial stone with marble glue, it is easy to degumming with the change of temperature.

On artificial stone, soft glue such as sealant or special artificial stone sealant can be used.

3, artificial stone can not dry grinding

For artificial stone grinding, it must be ground with water. Because high temperature will have a significant effect on the resin, there will be problems such as discoloration and ablation.

Therefore, pay attention to a detail when grinding artificial stone. That is, you must first release the water before starting the machine; at the end, stop the machine first, then stop the water.

summary

In fact, artificial stone is an easy-to-make variety because it is uniform in material, non-absorbent, and not easily broken. These are advantages over natural stone. If you can master the above methods, pay attention to the necessary details, the renovation and maintenance of artificial stone, you can make excellent results.